If you’ve got a slightly older e*thirteen guide that’s missing some parts, or needs a bit of a re-fresh, take a look at what we dug up from the depths of the warehouse and see if it is right for you.

These are genuine e*thirteen parts, some of them dating back a few years so fitment information is a bit sketchy, but if you can compare the image against what you’ve already got we’re confident that it will work.

Please read the individual product descriptions, and view the individual images before making your selection from the drop-down menu above.

Each item is sold separately, and supplied with only what's shown in the image.

Note:
ISCG 05 has a bolt pattern with 55.92 mm between bolt holes and is designed to bolt directly to your Frames 2005 onwards ISCG  tabs.
ISCG Old has a bolt pattern with 47.8 mm between bolt holes and is designed to bolt directly to Frames with ISCG tabs prior to 2005, (or if supplied with an adapter will bolt to any frame without ISCG tabs)

E-13  09 SRS+ Backplate Upper
This back-plate is stupendously light having been CNC’d to within an inch of its life.  It will fit the 2009 SRS+ guide and  mounts to frames with the ISCG Old bolt pattern. This new-style back-plate allows 3 mounting positions for the lower arm to give 3 different angles for the lower roller.
Note:
Does not come with any hardware, guide plates or bolt-on lower arm.
36T option fits 32-36T chainrings
40T option fits 36-40T chainrings

E-13  09 LG1+ Backplate Upper 36t 05
This back-plate is stupendously light having been CNC’d to within an inch of its life.  It will fit the 2009 LG1+ guide and is for use with a 32-36T chainring and mounts to frames with the ISCG 05 bolt pattern. This new-style back-plate allows 3 mounting positions for the integrated taco bash-guard and roller to give 3 different angles for the lower roller.
Note:
Does not come with any hardware, guide plates or bolt-on lower taco bash-guard.
36T option fits 32-36T chainrings
40T option fits 36-40T chainrings

E-13  09 SRS+  Lower Arm
This lower arm fits the SRS+ back-plate allowing 3 seperate mounting postions for the lower roller.  Stupidly light!
36T option fits 32-36T chainrings
40T option fits 36-40T chainrings

E-13   DRS CNC Backplate  E-Type
This CNC’d back-plate fits the DRS Dual Ring guide and features mounting points for an E-type derailleur.
Designed to replace the standard DRS back-plate, and allow those with E-type derailleurs to keep their current derailleur and mount it directly to the E-Thirteen back-plate.
Note:
BB option mounts between frame and BB cup
ISCG 05 option mounts directly to ISCG 05 frame tabs

E-13   SRS CNC Backplate Wide 40t
This CNC’d back-plate fits the SRS guide and has extra width between top and bottom arms to provide added clearance for bikes with lower than normal chainstays / swingarms, as is common on long travel bikes when their suspension is in its uncompressed state.