*Valid until 10am Monday 28th May
The Elite Team workstand features outstanding stability and folds to a compact size for easy storage and transport. The clamping mechanism uses a cam lever to close the rubber-covered jaws. Jaws are spring-loaded and will hold your bike frame tubes or seat posts without damage. The bike repair stand clamp rotates 360° and can be raised by using the sliding locking clamps to a working height of 56". Folds to 40" long. Powder-coated finish for durability. Designed to be easy to use, the Elite Team workstand allows you to work on any part of your bicycle, wherever you are and folds quickly for easy storage.
Top Features of the Elite Team Workstand
The new Elite Team Workstand brings a new level of quality and functionality to the portable workstand arena. Designed to be easy to use, the Team Workstand allows you to work on any part of your bicycle, wherever you are and folds quickly for easy transport to events Accepts virtually any bike except tandems Bike can be attachedby the clamp (as required), and offers exceptional stability on virtually any surface.
- Height adjustable from 80 cm to 150cm, with the ability to rotate the upper section a full 360 degrees
- Workstand comes completely assembled and all steel and aluminium parts are powder coat painted for durability.
- Used by European Pro Tour teams
- Dimensions when folded: 170 x 196 x 1110 mm
- Weight: 5.75 kg
About Workstands
A bicycle workstand is a great investment, they hold your bike securely leaving both hands free to work. They hold the bike above the floor and can usually be adjusted in height and angle, this means you can reach those awkward parts and rotate the wheels, cranks and clean or adjust gears and brakes at will. Most workstands have a ’jaw’ which clamps around the bike, we suggest clamping at the seatpost as this is usually a thicker material than the frame and less prone to damage.
About the Elite brand
Elite have been manufacturers of cycling trainers, workstands and bottle cages. Elite were born at the end of the 1970s as builders of rollers for bike training and bike racks for cars. Elite entered the bicycle market as a company with the ability to interpret the needs ofthe bicycle market sector by creating modern and original products. In 1984, Elite was the first company in Europe to create and produce a roller with a posterior supporting stand, putting a milestone on the road of the development of this component. The bottle holder "Macan", which was introduced in 1987, revolutionised the basic concept of this accessory, with the introduction of new elements like for example the plastic covered head, to hold the bottle in place more firmly, or like the adjustable runners for the screws which fix things to the frame. Little by little, thanks to this continuous feeling for innovation and research, the bottle holder has also evolved: the "Ciussi" model with its characteristic anti-vibration side buttons, and the innovative "Patao" with its futuristic design are the most evident fruits of this Italian Based company
- Tags Associated with this product
-
- Suggestions
-
-
Torpedo7 is always looking for ways to improve our product descriptions and content.
If you have found a discrepancy in this products description, image or sizing details
please let us know by filling out the suggestions form. Thanks Torpedo7.
-
Product Reviews
-
Great Workstand
SimonG, Canberra
Bought this on special and what a deal! I was surprised by how good the quality is given how cheap it was. Easy to put together and even easier to use. Holds a heavy bike comfortably. Makes tinkering so much easier. Don't know how I survived so long without one.
6:59:06 PM
2/9/11
-
VERY HAPPY!!!!
CharlesAllen, Taupo
Great buy!! Definitely love using Torpedo 7. Just bought their last Bianchi 928 with Ultegra on it, very happy with that as well.
4:49:14 PM
2/8/11
-
great, until it broke
RosaCoutts, Nelson
Had this stand for about 8 months, great. Could sometimes be unbalanced by the bike on the stand and fall forwards, but if careful ok. Then the quick release type mechanism which closes the clamp completely failed and the plastic broke, the clamp flicked open and I lost the washers! Now I use a quick hand clamp to attach the clamp to the bike. I would now spend real money to get a strong real bike stand. This was great, when it worked. Torpedo 7 service was great as always, just a bit disappointing the quality of the products isn't always up to the same standard.
10:02:57 PM
1/31/11
-
Now I see what all the fuss is about!!
RobC, KAMBAH
This thing is the duck's guts. Solid, easily assembled, Idiot proof use. Great value on special. Strong enough for my lightish (but never light enough) roadie, as well as my cast iron MTB.
10:55:37 PM
11/8/10
-
Great Value for money!
JamesAndrew, Sydney
Bought it on special and am very happy with the quality. Have used it a fair bit and so far so good, stable and easy to use.
Folds up small enough to fit in my boot as well!
10:42:53 AM
10/20/10
-
VALUE PLUS
JohnBannister, MILE END
Agree with all the other comments this is a very sturdy stand and great value when on special!
6:57:26 PM
9/17/10
-
It just works!
TristanY, WEST PENNANT HILLS
Solid, stable, and does the job as expected! A little ikea work is required to put it together initially - a phillips head screwdriver and spanner. A bargain when on discount. Ordered Thursday, and delivered from NZ into Sydney on Monday!
11:45:42 PM
8/24/10
-
Great buy.
LindsayChan, Tauranga Central
Brought stand on sale was thinking it was just going to be average but when it turned up I was very surprised by how solid it is I have a 18kg freeride bike and the stand works fine.
11:10:28 PM
8/24/10
-
Great Unit
NathanHey, Waiouru
Awesone Unit. Ordered yesterday. Arrived this morning. Easy to put together and holds the bike tightly around my seat post. Well Worth It.
11:01:04 AM
8/20/10
-
Surprising quality!
MikeCooney, Whangamata
Wasn't too sure what to expect with little info on the web about this stand. Anyway, took a punt and bought it and was pleasantly surprised at the quality. It's heavy duty and well made - and best of all, holds my 18kg downhill bike easily (by the seat post). The clamp seems study enough with plenty of adjustment. Definitely worth the money - esp when on special!
2:52:36 PM
8/19/10
-
Solid unit
HowardBaker, Takapuna
Been very pleased with my stand. Easy to put up and take down. Good solid platform with all the adjustments you will need. A steal when on special.
10:24:03 PM
8/16/10
Payment Details
Credit Cards:
We accept MasterCard and Visa
payments through our secure website.
Direct Credit:
Payments can be made by direct credit bank transfers.
Simply Checkout, and then make a deposit, with your order number as a reference.
Cheque:
New Zealand customers can also pay for purchases by means of Cheque payments.
Click here to view the rest of our Payment Details
Shipping & Delivery Details
Currently, all New Zealand orders are shipped through CourierPost.
Track n Trace details are emailed to you when we dispatch your order.
Shipping Times: 1-2 Business Days (Bulky items 3 Days)
Shipping Cost
|
Local Area
(Hamilton City)
|
Order Total
up to $50
|
Order Total
over $50
|
Mini Bulk
|
Mini Bulk 2
|
Bikes/Bulky
items
|
|
$2.75
|
$7.50
|
$10
|
$10
|
$20
|
$50
|
Click here to view the full Shipping details
|
;)
